SafetyProgramPro

Written Safety Program for Roofing Contractors

Roofing is the trade OSHA cites most for falls, and inspectors know it before they get out of the truck. Every roof means work above 6 feet, so fall protection is not conditional for your company, it is the spine of the program: anchor points, personal fall arrest, warning line and safety monitor systems where allowed, hole and skylight covers, and ladder setup and tie off. Torch down and kettle work adds hot work and fire watch, and summer roof deck temperatures put heat illness squarely on the list.

For most roofers, the written program shows up as a demand rather than a plan. A general contractor asks for the safety manual with the subcontract, a property management company requires it before a reroof, or the carrier asks at renewal after a claim. What they want is a document with your company name on the cover that spells out how your crews are protected at the edge.

What your program will include

  • Safety Policy Statement and Management Commitment
  • Fall Protection with written fall protection plan language (29 CFR 1926 Subpart M)
  • Ladder Safety and access (29 CFR 1926 Subpart X)
  • Safety Training and Orientation (29 CFR 1926.21)
  • PPE and Hazard Assessment including harnesses and lanyards (29 CFR 1926.95 to .96)
  • Hand and Power Tool Safety including nail guns (29 CFR 1926 Subpart I)
  • Hearing Conservation (29 CFR 1926.52)
  • Heat Illness Prevention (OSHA National Emphasis Program)
  • Fire Prevention for torch and kettle work (29 CFR 1926 Subpart F)
  • Housekeeping and Material Storage on the roof deck (29 CFR 1926.25)
  • Motor Vehicle Safety (29 CFR 1926.601)
  • Incident Reporting and Investigation

Your final section list is built from your own answers, so it may add or drop sections based on the work your crews actually do.

Why a generic template gets kicked back

  • A generic manual gives fall protection two paragraphs when a roofer needs anchor selection, rescue planning and hole cover rules.
  • Nothing addresses ladder tie off and roof access, which is where the majority of roofing citations start.
  • Heat illness is missing, even though summer roof deck work is the exact scenario OSHA emphasizes.

Answer 6 questions. $299 one-time. Instant PDF.

Start with Roofing already selected. About 10 minutes from first question to finished program.

Start My Roofing Program

Roofing safety program questions

Does the fall protection section include a written fall protection plan?

Yes. Because roofing always involves work above 6 feet, the program includes fall protection built around anchor points, personal fall arrest, controlled access and hole covers, plus rescue planning language.

Will it cover torch down and hot asphalt work?

Fire prevention is a core section, and if you tell us your crews do torch, kettle or metal cutting work the program adds hot work language with fire watch procedures.

Is heat illness included?

Yes when it applies. If your crews work outdoors most of the day or you operate in a high heat state such as Texas, Florida or Arizona, a Heat Illness Prevention section is added automatically.

How fast can I hand this to my GC?

Same day. It is $299 one time and the finished PDF downloads instantly, so you can email it to the GC minutes after you finish the six questions.

Other trades

HVACPlumbingElectricalConcreteFraming and CarpentryDrywallPaintingWelding and FabricationExcavation and UtilitiesLandscapingGeneral Contractor

See all trades